![]() ![]() Best way to approach a poorly-maintained network Windows.Http:/ Opens a new window / / cb/ html/ index.html#page/ FOS_Cookbook/ Install-basic/ update_firmware.html Opens a new window The FortiGate unit installs the new firmware image and restarts. The TFTP server uploads the firmware image file.ĩ When prompted how to save the default firmware, type D to load it as the default. : Quit menu and continue to boot with default firmware.Ħ Type G to get to the new firmware image form the TFTP server.ħ When prompted, enter the TFTP server IP address, and local FortiGate IP address.Ĩ Enter the firmware image filename and press Enter. [B[: Boot with backup firmware and set as default If you successfully interrupt the startup process, the messages similar to the following appear (depending on the FortiGate BIOS version): Immediately press any key to interrupt the system startup. Press any key to display configuration menu. The TFTP server should be on the same subnet as the management interface.ġ Connect to the CLI using the RJ-45 to DB-9 or null modem cable.Ģ Make sure the TFTP server is running and copy the firmware image file to the TFTP server.ģ Enter the following command to restart the FortiGate unit.Ĥ When prompted by the FortiGate unit to reboot, type y.ĥ As the FortiGate unit starts, a series of system startup messages appears. This procedure requires a TFTP server that you can connect to from the FortiGate unit. Installing FortiGate firmware from a TFTP server
0 Comments
Leave a Reply. |